Calibration Overview
ISO 17025 Calibration Services Saudi Arabia.
EIAC 17025 & ISO 9001:2015 accredited — 35+ service vehicles, 30,000 sq ft lab, eleven calibration disciplines, and authorized distribution for the instruments we calibrate.
- EIAC 17025 Accredited
- ISO 9001:2015 Certified
- Eleven Disciplines
- Authorized Distributor
ISO 17025 Calibration Services Saudi Arabia from General Const Lab Calibration, a division of General Tech Services, have been offered since 1998, growing over the years into one of the widest EIAC 17025 accredited laboratories serving the Kingdom. We serve customers across Aviation, Marine, Manufacturing, Power Transmission, Hospitals, Oil & Gas, Defence, and Water Treatment, covering eleven distinct calibration disciplines from a single accredited facility in Dammam.
Whether you need a single instrument calibrated or a full onsite calibration programme across a multi-site operation, our ISO 17025 Calibration Services Saudi Arabia laboratory is built to serve every industry from one accredited source rather than requiring separate specialist labs for each discipline. A facility running dimensional gauges, electrical test equipment, and pressure instruments shouldn’t need three separate calibration providers when one accredited lab can genuinely cover all three.
Accredited since
1998
Serving the Kingdom
Onsite fleet of over
35
Service vehicles
Calibration lab of
30,000
Square feet, Dammam
Accredited across
11
Calibration disciplines
Accreditation You Can Verify.
Our laboratory holds EIAC accredited calibration Saudi Arabia status alongside ISO 9001:2015 certified calibration Saudi Arabia management systems, both available for direct verification rather than taken on our word alone. All instruments we calibrate are traceable to national or international standards, and where a client has a specific requirement, we calibrate accordingly rather than defaulting to a generic procedure.
Why Use an Accredited Lab.
Accreditation exists to answer one question a self-declared calibration can’t: has the lab’s own process been independently checked, or are you simply trusting their word? Every calibration we run is judged against three things. The result has to be genuinely accurate, not a close approximation. It has to be repeatable, so the same instrument tested twice on different days gives the same answer rather than one that depends on which technician ran it. And the reference standard itself has to stay within its own conformance limits, since a drifting reference produces confidently wrong results for everything checked against it.
Our Calibration Disciplines.
We provide dimensional calibration Saudi Arabia for gauges, calipers, and micrometers, electrical calibration Saudi Arabia for multimeters and test equipment, and pressure calibration Saudi Arabia for gauges, transducers, and dead weight testers up to 20,000 PSI. Our temperature calibration Saudi Arabia capability covers thermocouples, ovens, and furnace uniformity surveys, while torque calibration Saudi Arabia and mass calibration Saudi Arabia serve wrenches, scales, and balances across a wide range of capacities.
Beyond these core disciplines, our full offering extends to humidity, volumetric, force, flow, and bio medical calibration, giving facilities running mixed instrumentation a single accredited provider rather than five separate specialist vendors.
Dimensional calibration
gauges, calipers, and micrometers
View service →
Electrical calibration
multimeters and test equipment
View service →
Pressure calibration
gauges, transducers, and dead weight testers up to 20,000 PSI
View service →
Temperature calibration
thermocouples, ovens, and furnace uniformity surveys
View service →
Humidity calibration
View service →
Torque calibration
View service →
Mass calibration
View service →
Volumetric calibration
View service →
Force calibration
View service →
Flow calibration
View service →
Bio Medical calibration
View service →Onsite Calibration Capability.
We maintain a fleet of over 35 service vehicles to provide onsite calibration services Saudi Arabia wherever your equipment sits, avoiding the disruption of removing instruments from an active production line. Our 30,000 square foot calibration lab Dammam facility provides a controlled, quality-focused environment for lab-based work where onsite calibration isn’t practical or necessary.
Authorized Distribution.
As the authorized service provider and authorized Mitutoyo NORBAR WIKA distributor Saudi Arabia relationship extending to SNAP-ON, Gagemaker, and MARK 10, we’re positioned as a comprehensive partner for both calibration and new tool needs. This means a facility can source a replacement instrument and have it calibrated by the same accountable provider, rather than coordinating a separate purchase and a separate calibration booking with two unrelated vendors.
Authorized for
- Mitutoyo
- NORBAR
- WIKA
- SNAP-ON
- Gagemaker
- MARK 10
Who We Serve.
Our accredited lab supports calibration services for oil and gas industry clients where instrument accuracy on process and safety systems is directly tied to compliance, calibration services for aviation industry operators requiring the highest measurement precision, and calibration services for hospitals relying on our bio medical calibration capability for patient-critical equipment. We also serve manufacturing, marine, power transmission, defence, and water treatment sectors from the same accredited facility.
- Aviation
- Marine
- Manufacturing
- Power Transmission
- Hospitals
- Oil & Gas
- Defence
- Water Treatment
Why Calibration Matters.
A gauge or scale that’s drifted out of tolerance doesn’t look broken. It keeps producing numbers that seem entirely reasonable, which is exactly what makes the drift dangerous — a manufacturer ships product built to a wrong measurement, a lab reports a result that isn’t actually accurate, or a safety-critical instrument passes a check it shouldn’t have. Regular calibration is what catches that gap before it becomes a rejected shipment, a failed audit, or worse. It also extends the working life of the instrument itself, since a calibration visit typically flags mechanical wear long before it would otherwise be noticed, and in fields like healthcare and aerospace, it’s the difference between a measurement you can act on and one you’re simply hoping is right.
Getting Your Instruments Calibrated.
From enquiry to certificate:
Enquiry
tell us the instrument type, discipline, and whether onsite or lab-based calibration fits your situation better.
Scheduling
we confirm a visit or drop-off time, typically within 24 to 48 hours of your enquiry.
Calibration
the instrument is checked against a certified reference traceable to national or international standards.
Certificate issuance
a traceable calibration certificate Saudi Arabia document is issued, typically within 2 to 3 working days.
Ongoing scheduling
for recurring calibration needs, we help set up a schedule so future visits don’t require re-explaining your equipment each time.
Why Choose General Const Lab Calibration.
Since 1998, we’ve grown into one of the widest EIAC 17025 accredited laboratories in the Kingdom, backed by a 30,000 square foot facility and a 35-vehicle onsite fleet most competitors can’t match. Facility managers comparing accredited labs are usually weighing discipline coverage and onsite capability as heavily as price, since a lab limited to a handful of calibration types or lacking a genuine onsite fleet isn’t a complete solution for a facility running mixed instrumentation across multiple sites. Choosing an ISO 17025 Calibration Services Saudi Arabia provider based on price alone, without checking discipline coverage and fleet capacity, often means discovering the gap only once a specific instrument type or an onsite job turns out to be outside the provider’s actual scope.
Frequently Asked Questions.
How many calibration disciplines do you cover?
Do you offer onsite calibration?
Is your lab accredited?
Do you calibrate to international standards only, or can you match a specific client requirement?
Can you supply new instruments as well as calibrate them?
How long does a standard calibration take?
EIAC 17025 & ISO 9001:2015 Accredited · Authorized Distributor
Get Your Calibration Scheduled Today.
Whether you need a single instrument calibrated or a full onsite programme across multiple sites, our team can confirm scope and turnaround before you commit. Getting in touch ahead of a compliance deadline or a plant shutdown window puts you in a far better position than scrambling once an instrument is already overdue for its scheduled check. Call +966 569 289 544 or email sales@generaltechsaudi.com to discuss your ISO 17025 Calibration Services Saudi Arabia needs.
